---

Change Machines

---

Standard Change-Makers, Inc.

SC34-RL - 1 Acceptor/3 Compartment Bill Stacker/4 Hoppers
System 600FST - Rear Load Changer

The model SC34RL is built to handle high volume coin dispensing. It is rugged, heavy steel with a stainless steel faceplate. Includes: System 600FST Bill Acceptor, four hoppers that will hold up to 12,800 quarters or any combination of coins or tokens (as shown); a three compartment bill stacker that will separate and stack up to 2,400 bills. To maximize owner confidence, high performance optical and magnetic sensors are combined with advanced technology to deliver a better, more accurate acceptance of genuine currency. Flexibility of security levels allows the owner to determine the level of security desired for each denomination of bill and the ability to restrict the acceptance of selected denominations. Color: Almond cabinet with a stainless steel front. It is shipped completely assembled and ready to install.

Two year limited warranty

Rapid and reliable support from strategically located company owned service centers. 2 year limited warranty.

• Maximum security heavy duty steel cabinetry with two Medeco® plug locks. Hoppers are easily accessible from rear of machine.
• Ordinary maintenance does not require special tools, expensive or high tech equipment.
• Personal Identification Number (PIN) allows owner to maintain control over many important fluctuations, such as the audit and program.
• Handheld Data Terminal provides valuable information on a two line, 32 digit read-out in English, Spanish or French.
• RS232 interface for hookup to computer or other type of compatible machine.
• Socketed e-prom software provides the owner with an easy method of upgrading for currency changes or program enhancements.
• Built in battery with a 10-year life maintains memory during a power loss.
• Hopper transfer is automatic on a sold-out or error condition to provide continuous performance.
• Extensive testing combined with quality control assures accurate, reliable performance.
• Bill Stackers come in two configurations: 1 compartment (800 bills), or 2 compartment (1600 bills). Bills can be separated by denomination in the 2 compartment stackers.

Specifications

Currency acceptance

United States: $1, 5, 10, 20 Dollar

Canada: $5, 10, 20 Dollar

Mexico: $10, 20, 50, 100, 200, 500 Peso

(New U.S.Currency will be programmed along with the old as soon as it becomes available.)

Power requirements:

105 to 125 Volts AC, 60 Cycle

Maximum operating efficiency: Up to 160 Fahrenheit (70 Celsius)

Hopper Capacities*

Coins	# Coins/$Value
$1 Coins	2,500 / $2500
Quarters	3,200 / $800
Dimes	7,500 / $750
Nickels	4,000 / $200

Changers will dispense tokens of various sizes -e.g. Tokens similar to quarters - 4,100 per hopper; dimes, 9,600, etc.

*Capacities are approximate depending upon the age and condition of bills and coins.

Measurements (Meets ADA Standards):

Cabinet Style	Plate Height	Plate Width	Height	Width	Depth	Actual Weight	Shipping Weight
SC34RL	37-3/4"	33"	34"	29-1/4"	18"	315lbs	345lbs
	96.5cm	83.8cm	86.3cm	76.6cm	45.7cm	143kg	156.6kg

Accessories

• Electronic Coin Acceptor
• Locking covers for coin hoppers
• Additional audit meters
• Weather shield(s)
• Heating device

Prices/Orders

---

SC32-RL-DA - 2 Acceptors/Two 1 Compartment Bill Stackers/2 Hoppers
SC34-RL-DA - 2 Acceptors/2 Two Compartment Bill Stackers/4 Hoppers
System 600FST - Rear Load Changers

These models consist of two complete, independent machines in one cabinet. Included are: two System 600FST Bill Acceptors, two or four hoppers that will hold 6,400 or 12,800 quarters respectively, or any combination of coins or tokens listed below. Two, 2 compartment bill stackers that will stack and separate 1,600 bills each for a total stacking capacity of 3,200 bills. Color: Almond cabinet, stainless steel front. The models SC32-RL-DA and SC34RL-DA are built to handle high volume coin dispensing. They are rugged, heavy steel with a stainless steel faceplate. To maximize owner confidence, high performance optical and magnetic sensors are combined with advanced technology to deliver a better, more accurate acceptance of genuine currency. Flexibility of security levels allows the owner to determine the level of security desired for each denomination of bill and the ability to restrict the acceptance of selected denominations. They are shipped complete and ready to install.

Two year limited warranty

Rapid and reliable support from strategically located company owned service centers. 2 year limited warranty.

• Maximum security heavy duty steel cabinetry with two Medeco® plug locks. Hoppers are easily accessible from rear of machine.
• Ordinary maintenance does not require special tools, expensive or high tech equipment.
• Personal Identification Number (PIN) allows owner to maintain control over many important fluctuations, such as the audit and program.
• Hand held Data Terminal provides valuable information on a two line, 32 digit read-out in English, Spanish or French.
• RS232 interface for hookup to computer or other type of compatible machine.
• Socketed e-prom software provides the owner with an easy method of upgrading for currency changes or program enhancements.
• Built in battery with a 10-year life maintains memory during a power loss.
• Hopper transfer is automatic on a sold-out or error condition to provide continuous performance.
• Extensive testing combined with quality control assures accurate, reliable performance.
• Bill Stackers come in two configurations: 1 compartment (800 bills), or 2 compartment (1600 bills). Bills can be separated by denomination in the 2 compartment stackers.

Specifications

Currency acceptance

United States: $1, 5, 10, 20 Dollar

Canada: $5, 10, 20 Dollar

Mexico: $10, 20, 50, 100, 200, 500 Peso

(New U.S.Currency will be programmed along with the old as soon as it becomes available.)

Power requirements:

105 to 125 Volts AC, 60 Cycle

Maximum operating efficiency: Up to 160 Fahrenheit (70 Celsius)

Hopper Capacities*

Coins	# Coins/$Value
$1 Coins	2,500 / $2500
Quarters	3,200 / $800
Dimes	7,500 / $750
Nickels	4,000 / $200

Changers will dispense tokens of various sizes -e.g. Tokens similar to quarters - 4,100 per hopper; dimes, 9,600, etc.

*Capacities are approximate depending upon the age and condition of bills and coins.

Measurements (Meets ADA Standards):

Cabinet Style	Plate Height	Plate Width	Height	Width	Depth	Actual Weight	Shipping Weight
SC34RL-DA	37-3/4"	33"	34"	29-1/4"	18"	346lbs	376lbs
	96.5cm	83.8cm	86.3cm	76.6cm	45.7cm	157kg	170.6kg

Accessories

• Electronic Coin Acceptor
• Locking covers for coin hoppers
• Additional audit meters
• Weather shield(s)
• Heating device

Prices/Orders

---

SC93 - 1 Acceptor/Two Compartment Bill Stacker/3 Hoppers
System 600FST - Free Standing Floor Models

Includes: 3 coin hoppers holding any combination of coins or tokens (as shown); System 600F5T bill acceptor; bill stacker that can stack and separate up to 1,600 bills. Color: black with speckled gray vinyl front. The SC9O Series of change machines are free standing, front loading console models. These machines are exceptionally well made and remarkably durable. The lower portion of the cabinet contains a locked compartment that can be used for storage of tokens, tickets, or other materials. Flexibility of security levels allows the owner to determine the level of security desired for each denomination of bill and the ability to restrict the acceptance of selected denominations.

Two year limited warranty

Rapid and reliable support from strategically located company owned service centers. 2 year limited warranty.

• Maximum security heavy duty steel cabinetry with three Medeco® plug locks or two "T" handle locks and hoppers are easily accessible from front of machine.
• Ordinary maintenance does not require special tools, expensive or high tech equipment.
• Personal Identification Number (PIN) allows owner to maintain control over many important fluctuations, such as the audit and program.
• Hand held Data Terminal provides valuable information on a two line, 32 digit read-out in English, Spanish or French.
• RS232 interface for hookup to computer or other type of compatible machine.
• Socketed e-prom software provides the owner with an easy method of upgrading for currency changes or program enhancements.
• Built in battery with a 10-year life maintains memory during a power loss.
• Hopper transfer is automatic on a sold-out or error condition to provide continuous performance.
• Extensive testing combined with quality control assures accurate, reliable performance.
• Bill Stackers come in two configurations: 1 compartment (800 bills), or 2 compartment (1600 bills). Bills can be separated by denomination in the 2 compartment stackers.

Specifications

Currency acceptance

United States: $1, 5, 10, 20 Dollar

Canada: $5, 10, 20 Dollar

Mexico: $10, 20, 50, 100, 200, 500 Peso

(New U.S.Currency will be programmed along with the old as soon as it becomes available.)

Power requirements:

105 to 125 Volts AC, 60 Cycle

Maximum operating efficiency: Up to 160 Fahrenheit (70 Celsius)

Hopper Capacities*

Coins	# Coins/$Value
$1 Coins	2,500 / $2500
Quarters	3,200 / $800
Dimes	7,500 / $750
Nickels	4,000 / $200

Changers will dispense tokens of various sizes -e.g. Tokens similar to quarters - 4,100 per hopper; dimes, 9,600, etc.

*Capacities are approximate depending upon the age and condition of bills and coins.

Measurements (Meets ADA Standards):

Cabinet Style	Height	Width	Depth	Actual Weight	Shipping Weight
SC93	56"	28"	18"	418lbs	423lbs
	127cm	71.1cm	45.7cm	181.6kg	192kg

*Allow 12" clearance to open top

Accessories

• Electronic Coin Acceptor
• Locking covers for coin hoppers
• Additional audit meters
• Tower light
• Custom color and graphics
• Electronic scrolling signage

Prices/Orders

---

SC94 - 1 Acceptor/Three Compartment Bill Stacker/4 Hoppers
System 600FST - Free Standing Floor Model

Includes: 4 coin hoppers holding any combination of coins or tokens (as shown); System 600F5T bill acceptor; bill stacker that can stack and separate up to 2,400 bills. Color: black with speckled gray vinyl front. The SC9O Series of change machines are free standing, front loading console models. These machines are exceptionally well made and remarkably durable. The lower portion of the cabinet contains a locked compartment that can be used for storage of tokens, tickets, or other materials. Flexibility of security levels allows the owner to determine the level of security desired for each denomination of bill and the ability to restrict the acceptance of selected denominations.

Two year limited warranty

Rapid and reliable support from strategically located company owned service centers. 2 year limited warranty.

• Maximum security heavy duty steel cabinetry with three Medeco® plug locks or two "T" handle locks and hoppers are easily accessible from front of machine.
• Ordinary maintenance does not require special tools, expensive or high tech equipment.
• Personal Identification Number (PIN) allows owner to maintain control over many important fluctuations, such as the audit and program.
• Hand held Data Terminal provides valuable information on a two line, 32 digit read-out in English, Spanish or French.
• RS232 interface for hookup to computer or other type of compatible machine.
• Socketed e-prom software provides the owner with an easy method of upgrading for currency changes or program enhancements.
• Built in battery with a 10-year life maintains memory during a power loss.
• Hopper transfer is automatic on a sold-out or error condition to provide continuous performance.
• Extensive testing combined with quality control assures accurate, reliable performance.
• Bill Stackers come in two configurations: 1 compartment (800 bills), or 2 compartment (1600 bills). Bills can be separated by denomination in the 2 compartment stackers.

Specifications

Currency acceptance

United States: $1, 5, 10, 20 Dollar

Canada: $5, 10, 20 Dollar

Mexico: $10, 20, 50, 100, 200, 500 Peso

(New U.S.Currency will be programmed along with the old as soon as it becomes available.)

Power requirements:

105 to 125 Volts AC, 60 Cycle

Maximum operating efficiency: Up to 160 Fahrenheit (70 Celsius)

Hopper Capacities*

Coins	# Coins/$Value
$1 Coins	2,500 / $2500
Quarters	3,200 / $800
Dimes	7,500 / $750
Nickels	4,000 / $200

Changers will dispense tokens of various sizes -e.g. Tokens similar to quarters - 4,100 per hopper; dimes, 9,600, etc.

*Capacities are approximate depending upon the age and condition of bills and coins.

Measurements (Meets ADA Standards):

Cabinet Style	Height	Width	Depth	Actual Weight	Shipping Weight
SC94	56"	28"	18"	418lbs	423lbs
	127cm	71.1cm	45.7cm	181.6kg	192kg

*Allow 12" clearance to open top

Accessories

• Electronic Coin Acceptor
• Locking covers for coin hoppers
• Additional audit meters
• Tower light
• Custom color and graphics
• Electronic scrolling signage

Prices/Orders

---

SC93TOK - 1 Acceptor/Two Compartment Bill Stacker/3 Hoppers
System 600FST - Free Standing Floor Model

Includes: 3 coin hoppers holding any combination of coins or tokens (as shown); System 600F5T bill acceptor; bill stacker that can stack and separate up to 1,600 bills. The SC93-TOK is a deluxe token vending machine featuring a large 'casino style' coin cup and 'T' handle lock. Color: bright red with white vinyl front screened "TOKENS". The SC9O Series of change machines are free standing, front loading console models. These machines are exceptionally well made and remarkably durable. The lower portion of the cabinet contains a locked compartment that can be used for storage of tokens, tickets, or other materials. Flexibility of security levels allows the owner to determine the level of security desired for each denomination of bill and the ability to restrict the acceptance of selected denominations.

Two year limited warranty

Rapid and reliable support from strategically located company owned service centers. 2 year limited warranty.

• Maximum security heavy duty steel cabinetry with three Medeco® plug locks or two "T" handle locks and hoppers are easily accessible from front of machine.
• Ordinary maintenance does not require special tools, expensive or high tech equipment.
• Personal Identification Number (PIN) allows owner to maintain control over many important fluctuations, such as the audit and program.
• Hand held Data Terminal provides valuable information on a two line, 32 digit read-out in English, Spanish or French.
• RS232 interface for hookup to computer or other type of compatible machine.
• Socketed e-prom software provides the owner with an easy method of upgrading for currency changes or program enhancements.
• Built in battery with a 10-year life maintains memory during a power loss.
• Hopper transfer is automatic on a sold-out or error condition to provide continuous performance.
• Extensive testing combined with quality control assures accurate, reliable performance.
• Bill Stackers come in two configurations: 1 compartment (800 bills), or 2 compartment (1600 bills). Bills can be separated by denomination in the 2 compartment stackers.

Specifications

Currency acceptance

United States: $1, 5, 10, 20 Dollar

Canada: $5, 10, 20 Dollar

Mexico: $10, 20, 50, 100, 200, 500 Peso

(New U.S.Currency will be programmed along with the old as soon as it becomes available.)

Power requirements:

105 to 125 Volts AC, 60 Cycle

Maximum operating efficiency: Up to 160 Fahrenheit (70 Celsius)

Hopper Capacities*

Coins	# Coins/$Value
$1 Coins	2,500 / $2500
Quarters	3,200 / $800
Dimes	7,500 / $750
Nickels	4,000 / $200

Changers will dispense tokens of various sizes -e.g. Tokens similar to quarters - 4,100 per hopper; dimes, 9,600, etc.

*Capacities are approximate depending upon the age and condition of bills and coins.

Measurements (Meets ADA Standards):

Cabinet Style	Height	Width	Depth	Actual Weight	Shipping Weight
SC93-TOK	56"	28"	18"	418lbs	423lbs
	127cm	71.1cm	45.7cm	181.6kg	192kg

*Allow 12" clearance to open top

Accessories

• Electronic Coin Acceptor
• Locking covers for coin hoppers
• Additional audit meters
• Tower light
• Custom color and graphics
• Electronic scrolling signage

Prices/Orders

---

SC94TOK - 1 Acceptor/Three Compartment Bill Stacker/4 Hoppers
System 600FST - Free Standing Floor Model

Includes: 4 coin hoppers holding any combination of coins or tokens (as shown); System 600F5T bill acceptor; bill stacker that can stack and separate up to 2,400 bills. The SC94-TOK is a deluxe token vending machine featuring a large 'casino style' coin cup and 'T' handle lock. Color: bright red with white vinyl front screened "TOKENS". The SC9O Series of change machines are free standing, front loading console models. These machines are exceptionally well made and remarkably durable. The lower portion of the cabinet contains a locked compartment that can be used for storage of tokens, tickets, or other materials. Flexibility of security levels allows the owner to determine the level of security desired for each denomination of bill and the ability to restrict the acceptance of selected denominations.

Two year limited warranty

Rapid and reliable support from strategically located company owned service centers. 2 year limited warranty.

• Maximum security heavy duty steel cabinetry with three Medeco® plug locks or two "T" handle locks and hoppers are easily accessible from front of machine.
• Ordinary maintenance does not require special tools, expensive or high tech equipment.
• Personal Identification Number (PIN) allows owner to maintain control over many important fluctuations, such as the audit and program.
• Hand held Data Terminal provides valuable information on a two line, 32 digit read-out in English, Spanish or French.
• RS232 interface for hookup to computer or other type of compatible machine.
• Socketed e-prom software provides the owner with an easy method of upgrading for currency changes or program enhancements.
• Built in battery with a 10-year life maintains memory during a power loss.
• Hopper transfer is automatic on a sold-out or error condition to provide continuous performance.
• Extensive testing combined with quality control assures accurate, reliable performance.
• Bill Stackers come in two configurations: 1 compartment (800 bills), or 2 compartment (1600 bills). Bills can be separated by denomination in the 2 compartment stackers.

Specifications

Currency acceptance

United States: $1, 5, 10, 20 Dollar

Canada: $5, 10, 20 Dollar

Mexico: $10, 20, 50, 100, 200, 500 Peso

(New U.S.Currency will be programmed along with the old as soon as it becomes available.)

Power requirements:

105 to 125 Volts AC, 60 Cycle

Maximum operating efficiency: Up to 160 Fahrenheit (70 Celsius)

Hopper Capacities*

Coins	# Coins/$Value
$1 Coins	2,500 / $2500
Quarters	3,200 / $800
Dimes	7,500 / $750
Nickels	4,000 / $200

Changers will dispense tokens of various sizes -e.g. Tokens similar to quarters - 4,100 per hopper; dimes, 9,600, etc.

*Capacities are approximate depending upon the age and condition of bills and coins.

Measurements (Meets ADA Standards):

Cabinet Style	Height	Width	Depth	Actual Weight	Shipping Weight
SC94-TOK	56"	28"	18"	418lbs	423lbs
	127cm	71.1cm	45.7cm	181.6kg	192kg

*Allow 12" clearance to open top

Accessories

• Electronic Coin Acceptor
• Locking covers for coin hoppers
• Additional audit meters
• Tower light
• Custom color and graphics
• Electronic scrolling signage

Prices/Orders

---

EC100
Economy Changer, Front Load, One Hopper, Coinco

Front Load Economy Changer

Cabinetry

• Heavy 12 gauge steel with front opening door designed specifically for security.
• Contains a sturdy "T" handle lock assembly with reinforcing.
• Uses an ACE® brand plug lock as standard equipment.
• Cabinet is pre-drilled with holes for wall or base mounting.
• Attractive, scratch resistant Lexan front door graphics.

Hoppers

• One high speed steel hopper with a 3200 quarter capacity.
• Hopper can be used without modification for one dollar coins.
• Bulk loading design with easy coin dumping.

Bill Acceptor

• Pyramid Technologies^®, with 500 bill stacking capacity.
• Accepts $1, $5, $10 and $20's. Other bill acceptors are available.
• Machine is designed to be used with most 120 VAC bill acceptors.

Options

• Base and header option.
• Base is constructed of sturdy 12 gauge steel.
• Base contains toe kick plate and levelers.
• Medeco® Lock plugs and a locking lid for hopper are also available.

Other

• Bill-in hard audit
• Can be shipped UPS.
• 2 year limited warranty.

Dimensions

	width	height	depth
Cabinet	8-1/2"	32"	13"
Base	8-1/2"	30"	13"
Header	8-1/2"	10"	13"

Header, Machine and Base total height is 72".

Prices/Orders

---

MC200
Economy Changer, Front Load, Two Hoppers, Coinco

Front Load Economy Changer

Cabinetry

• Heavy 12 gauge steel with front opening door designed specifically for security.
• Contains a sturdy "T" handle lock assembly with reinforcing.
• Uses an ACE® brand plug lock as standard equipment.
• Cabinet is pre-drilled with holes for wall or base mounting.
• Attractive, scratch resistant Lexan front door graphics.

Hoppers

• Two high speed steel hoppers, each with a 3200 quarter capacity for a total of 6400 quarters.
• Hopper can be used without modification for one dollar coins.
• Bulk loading design with easy coin dumping.

Bill Acceptor

• Pyramid Technologies^®, with 500 bill stacking capacity.
• Accepts $1, $5, $10 and $20's. Other bill acceptors are available.
• Machine is designed to be used with most120 VAC bill acceptors.

Options

• Base and header option.
• Base is constructed of sturdy 12 gauge steel.
• Base contains toe kick plate and levelers.
• The coin acceptance options available are either a high security (electronic) or low security (mechanical) acceptor.
• Knock out holes on door for easy coin acceptor field installation.
• Stackers for bill acceptors that hold 500 or 1000 bills are available.
• Medeco® Lock plugs and a locking lid for hopper are also available.

Other

• Bill-in hard audit.
• Can be shipped UPS.
• 2 year limited warranty.

Dimensions

	width	height	depth
Cabinet	13-1/2"	26"	13"
Base	13-1/2"	30"	13"
Header	13-1/2"	16"	13"

Header, Machine and Base total height is 72".

Prices/Orders

---

EC300RL
Economy Changer, Rear Load, One Hopper, Coinco

The EC3O0RL is a through the wall, rear loading changer designed for outdoor or indoor use. It contains one high speed steel hopper that holds up to $800 in quarters. The hopper can also be used for one dollar coins without modification. The Bill Acceptor will authenticate $1, 5, 10 and 20 dollar U.S. Bills. The currency of some other countries can also be accepted.

Cabinetry

• Heavy 12 gauge steel with stainless steel faceplate and rear opening door designed specifically for security.
• Contains a sturdy "T" handle lock assembly with reinforcing.
• An ACE® brand plug lock is standard equipment.
• Attractive, scratch resistant Lexan front door graphics.

Hopper

• One high speed steel hopper with a capacity of 3200 quarters.
• Hopper can be used without modification for one dollar coins.
• This bulk loading hopper is easy to fill and can be easily dumped for accountability purposes.

Bill Acceptor

• In the United States a Pyramid Technologies^® bill acceptor with a 500 bill stacking capacity is standard equipment.
• This acceptor is capable of authenticating $1, 5, 10 and 20 dollar bills.
• Denominations that the owner does not want to accept can easily be shut off.
• Machines used in countries other than the U.S. may contain a different bill acceptor.
• The Machine is designed to be used with most 120 VAC bill acceptors.

Options

• Medeco® lock plug
• Hard audit on hopper for coin count

Other

• Bill-in hard audit.
• 2 year limited warranty.
• Meets ADA standards.

Dimensions

	width	height	depth	weight
Cabinet	9"	32"	13"	110lbs

Add 2" to top, bottom and sides for stainless steel faceplate.

Prices/Orders

---

EC400RL
Economy Changer, Rear Load, Two Hoppers, Coinco

The EC400RL is a through the wall, rear loading changer designed for outdoor or indoor use. It is built with heavy gauge steel and contains a stainless steel faceplate. Two bulk loading hoppers are standard equipment.A hard "Bill-In" audit is also standard. This machine is also designed to incorporate a mechanical or electronic coin acceptor.

Cabinetry

• Heavy 12 gauge steel with stainless steel faceplate and rear opening door designed specifically for security.
• Contains a sturdy "T" handle lock assembly with reinforcing.
• An ACE® brand plug lock is standard equipment.
• Cabinet is pre-drilled with holes for wall or base mounting.
• Attractive, scratch resistant Lexan front door graphics.

Hoppers

• Two high speed steel hoppers, each with a 3200 quarter capacity for a total of 6400 quarters.
• Hoppers can be used without modification for one dollar coins.
• Bulk loading design insures ease of filling.Easily dumps for accountability.

Bill Acceptor

• In the United States a Pyramid Technologies^® bill acceptor with a 500 bill stacking capacity is standard equipment.
• This acceptor is capable of authenticating $1, 5, 10 and 20 dollar bills.
• Denominations that the owner does not want to accept can easily be shut off.
• Machines used in countries other than the U.S.may contain a different bill acceptor.
• The Machine is designed to be used with most 120 VAC bill acceptors.

Options

• Medeco® Lock plug is available.
• Hard audit for hoppers to display hopper dispense.
• Mechanical or electronic coin acceptor.

Other

• Bill-in hard audit.
• 2 year limited warranty.
• Meets ADA standards.

Dimensions

	width	height	depth	weight
Cabinet	13.7"	28"	13"	135lbs

Add 2" to top, bottom and sides for stainless steel faceplate.

SC101(1 Hopper)
SC102(2 Hoppers)
System 600FST - Front Load Models

The SC1OO Series consists of one or two hopper machines. Although primarily used in banks of vend-ing machines they can be used wherever reduced space is required. It is recommended that these machines be purchased with the 24" base for stability.

To maximize owner confidence, high performance optical and magnetic sensors are combined with advanced technology to deliver a better, more accurate acceptance of genuine currency. Flexibility of security levels allows the owner to determine the level of security desired for each denomination of bill and the ability to restrict the acceptance of selected denominations.

Model SC1O1 (1 hopper)
Includes: System 600 FST Bill Acceptor, one hopper that will hold up to 3,200 quarters or any single denomination of coins or tokens shown below; A one compartment bill stacker that will stack up to 800 bills. Color: Black with speckled gray vinyl on door.

Model SC1O2 (2 hoppers)
Includes: System 600 FST Bill Acceptor, that will hold up to 6,400 quarters or a combination of any two coins or tokens shown below. A two compartment bill stacker that will stack and separate up to 1,600 bills. Color: Black with speckled gray vinyl on door.

Two year limited warranty

Rapid and reliable support from strategically located company owned service centers. 2 year limited warranty.

Specifications

Currency acceptance

United States: $1, 5, 10, 20 Dollar

Canada: $5, 10, 20 Dollar

Mexico: $10, 20, 50, 100, 200, 500 Peso

(New U.S.Currency will be programmed along with the old as soon as it becomes available.)

Power requirements:

105 to 125 Volts AC, 60 Cycle

Maximum operating efficiency: Up to 160 Fahrenheit (70 Celsius)

Hopper Capacities*

Coins	# Coins/$Value
$1 Coins	2,500 / $2500
Quarters	3,200 / $800
Dimes	7,500 / $750
Nickels	4,000 / $200

Changers will dispense tokens of various sizes -e.g. Tokens similar to quarters - 4,100 per hopper; dimes, 9,600, etc.

*Capacities are approximate depending upon the age and condition of bills and coins.

Measurements (Meets ADA Standards):

Cabinet Style	Height	Width	Depth	Actual Weight	Shipping Weight
SC101	34"	15 3/8"	18"	134lbs	144lbs
	86.3cm	39.1cm	45.7cm	60.8kg	65.4kg
SC102	34"	15 3/8"	18"	140lbs	150lbs
	86.3cm	39.1cm	45.7cm	63.6kg	68.1kg

Accessories

• Electronic Coin Acceptor
• Locking covers for coin hoppers
• Additional audit meters
• Header With Base: 14" Header with 24" Base

Features

• Extensive testing combined with quality control assures accurate, reliable performance.
• Maximum security heavy duty steel cabinetry with "T" handle lock.
• Bill Stackers come in two configurations; 1 compartment (800) bills or 2 compartment (1600 bills). Bills can be separated by denomination in the 2 compartment stackers.
• Personal Identification Number (PIN) allows owner to maintain control over many important functions, such as the audit and program.
• Hand held Data Terminal provides valuable information on a two line, 32 digit read-out in English, Spanish or French.
• Socketed e-prom software provides the owner with an easy method of upgrading for currency changes or program enhancements.
• RS232 interface for hookup to computer or other type of compatible machine.
• Built in battery with a 10-year life maintains memory during a power loss.
• Hopper transfer is automatic on a sold-out or error condition to provide continuous performance.
• Ordinary maintenance does not require special tools, expensive or high tech equipment.

Prices/Orders

---

[ Hamilton | Rowe | Standard 1 | Standard 2 ]

---

[ Top of Page ]
[ Homepage ] [ Change Machines ] [ Tankless Water Heaters ] [ Washers ] [ Dryers ] [ Fluff & Fold ] [ Vending Machines ] [ Laundry Carts ] [ SiteMap ]